WEG ELECTRIC CFW500 SERIES AC HIGH-PERFORMANCE DRIVE, ENCLOSED, 230 VAC, 1/4HP WITH 3-PHASE AND 1-PHASE INPUT, SVC, V/HZ, VVW, FOC, ENCODER OR TORQUE MODE, A FRAME, RS-485. OPTIONAL COMMUNICATION AND STO MODULES AVAILABLE.
| Brand | WEG Electric |
| Item | Drive |
| For Use With | 3-phase induction and permanent magnet AC motors |
| Additional Information | Optional communication and STO modules available |
| IP Rating | IP20 |
| Mounting | 35mm DIN rail, panel or wall |
| Series | CFW500 |
| Voltage Type | AC |
| Manufacturer Part Number | CFW500A01P6B2NB20G2 |
| Frame Size | A |
| Amperage Rating | 1.6A |
| Enclosure Type | Enclosed |
| Load Current | 0.5A/point relay, 150 mA/point discrete |
| Communication Port and Connection Type(s) | (1) RS-485 (3-pin terminal) |
| Port Protocol(s) | Modbus RTU Master/Slave |
| Port Speed(s) | up to 38.4k baud |
| Relay Configuration | (1) Form C (SPDT) relay |
| Output Type | PWM output |
| Connector Type | Screw terminal |
| Number of Input Phases | 3 and 1 |
| Number Of Input Channels | 1 |
| Number Of Output Channels | 1 |
| Input Current Signal Range | 0-20 mA and 4-20 mA |
| Input Voltage Signal Range | 0-10 VDC |
| Output Current Signal Range | 0-20 mA and 4-20 mA |
| Output Voltage Signal Range | 0-10 VDC |
| Number of Analog Input Channels | 1 |
| Analog Input Signal Type | Current/voltage |
| Number of Points per Analog Input Common | 1 |
| Input Resolution | 10-bit |
| Temperature Rating | -10 to 50 deg C |
| Output Resolution | 10-bit |
| Discrete Input Type | Sourcing/sinking |
| Number of Non-Isolated Discrete Input Commons | 1 |
| Discrete Output Type | Sinking/relay |
| Number of Non-Isolated Discrete Output Commons | 1 |
| Fuse Type | User-supplied external fuse |
| Number of Points per Discrete Input Common | 1 |
| Number of Points per Discrete Output Common | 1 |
| Programming Language | Ladder |
| Number of Discrete Input Points | 4 |
| Number of Discrete Output Points | 2 |
| Number of Non-Isolated Analog Input Commons | 1 |
| Number of Analog Output Channels | 1 |
| Analog Output Signal Type | Current/voltage |
| Number of Non-Isolated Analog Output Commons | 1 |
| Number of Points per Analog Output Common | 1 |
| Controller Type | High-performance |
| Nominal Drive Input Voltage | 230 VAC |
| Nominal Drive Output Voltage | 230 VAC |
| Number of Output Phases | 3 |
| Horsepower By Input Phase | 1/4hp with 3-phase and 1-phase input |
| Control Mode | SVC, V/Hz, VVW, FOC, encoder or torque |
| Safe Torque Off (STO) | No |
| Input Signal | 4-20 mA, voltage or potentiometer input |
| Reverse Capability | Built-in |
| Internally Bypassed | No |
| Carrier Frequency Range | 2.5-15 kHz |
| Output Frequency Range | 0.1-500 Hz |
| Nominal Discrete Input Voltage | 24 VDC |
| Nominal Discrete Output Voltage | 240 VAC and 24 VDC |
15570800 2D Drawing
Download
15570800 STP 3D Model
Download
BACnet Manual
Download
Category 2D Drawing
Download
Drive Firmware Update Guide
Download
Drive Installation Guide
Download
Drive Programming Manual
Download
Drive Quick Start Guide
Download
Drive User Manual
Download
EDS file for EtherNet/IP
Download
EMI Mitigation Techniques
Download
Ethernet User's Guide
Download
IP20 Drive Product Line Brochure
Download
Modbus RTU User Manual
Download
Parameter Reference
Download
Product Cut Sheet
Download
Product Line Brochure
Download
Pump Application Manual
Download
Sample PLC Programs for WEG CFW500 Drive Control
Download
Serial Comms Quick Start Guide
Download
Technical Specifications
Download
WLP SoftPLC Pump Genius Software
Download
