LS ELECTRIC SERVO DRIVE, 1 KW, 230 VAC, 1 AND 3-PHASE, (2) ETHERNET 100BASE-TX (RJ45) PORT(S), ETHERCAT SLAVE AND MODBUS TCP. FOR USE WITH 1 KW SYSTEMS.
| Brand | LS Electric |
| Item | Servo drive |
| For Use With | 1 kW systems |
| IP Rating | IP20 |
| Mounting | Panel |
| Power Rating | 1 kW |
| Voltage Type | AC |
| Amperage Rating | 6.7A |
| Enclosure Type | Enclosed |
| Communication Port and Connection Type(s) | (2) Ethernet 100Base-TX (RJ45) |
| Port Protocol(s) | EtherCAT Slave + Modbus TCP Server + webserver (non-secure HTTP) |
| Port Speed(s) | 100 Mbps |
| Output Type | SVPWM output |
| Number of Input Phases | 1 and 3 |
| Nominal Input Voltage | 230 VAC |
| Input Voltage Signal Range | +/- 10 VDC |
| Output Voltage Signal Range | +/- 10 VDC |
| Number of Analog Input Channels | 1 |
| Analog Input Signal Type | Voltage |
| Temperature Rating | 0 to 50 deg C |
| Protection Type(s) | overcurrent + overload + over-temperature + overvoltage + undervoltage + encoder error + position error + current sensing error |
| Discrete Input Type | Sinking/sourcing |
| Discrete Output Type | Sinking |
| Number of Discrete Input Points | 6 |
| Number of Discrete Output Points | 3 |
| Number of Analog Output Channels | 2 |
| Analog Output Signal Type | Voltage |
| Configuration | Software |
| Control Mode | Torque, velocity and position |
| Encoder Resolution | 19-bit (524288 ppr) |
| Steps per Revolution | Up to 19-bit (524288 ppr) |
| Tuning Mode | On-line auto/off-line auto/manual |
| Encoder Output | Yes |
| Derating | For 1-phase supply: This drive can only supply 200\% max motor torque. Use iX7NHA020U-AD to get the standard 300\% |
